LED Panel Gluing & LED Strip Stickening Machine
1. Designed for the glue-making and sticking process of bottom-emitting panel lights;
2. The glue is extruded uniformly, the amount of glue can be adjusted, and the movement speed of the dispensing can be adjusted digitally; the glue is discharged stably, without drawing or dripping
3. It can apply glue for multiple strips at a time, with high speed, high efficiency and good stability.
4. Adjustable width, suitable for different specifications panel lights
5. Design capacity: Product specifications are about 300pcs / h below 600 * 600mm, actual capacity
6. It depends on the viscosity of the glue and other factors;
7. For products of the same specification, just adjust the width of the guide plate;
8. The whole machine adopts motion control board + PLC control, the touch screen man-machine dialogue interface is easy to learn and use
9. Intuitive operation control.
Place the lamp tray on the belt conveyor line. When the lamp tray is transported to the specified position, the sensor will automatically detect the product, and multiple dispensing heads will start to dispense at the same time. The belt conveyor line will drive the lamp tray along the line at the predetermined position. Glue, at the same time can set the dispensing movement speed in the touch screen to control the amount of glue.
|Control System||Motion Control Board + PLC|
|Driving Motor||Servo Motor, speed control motor, stepper motor|
|For Panel Max. Size||1200*600*80 mm|
|Machine Size||L5500*W2300*H1500 mm|
|Working Power||AC220-380V/50～60Hz/ 3500W|
|Working Pressure||4- 6 Mpa|
|Working Environment||0 ~ 40℃ ; 20 ~ 90% humidity|